Litcoin Antminer L3+ (504Mh) from Bitmain mining Scrypt algorithm with a maximum hashrate of 504Mh/s for a power consumption of 800W
| Model | Antminer L3+ |
| Algorithm | Cryptocurrency | Scrypt | LTC/DOGE |
| Hashrate | 504mh ±3% |
| Power Consumption | 800W ± 5% |
| Power Efficiency | 1.6J/MN ± 10%@25° C |
| Net Dimensions | 188*130*352mm |
| Net Weight | 4.5KG |
| Fans | 2 |
| Noise Level | 70bd |
| Power supply AC Input voltag | 116~130Volt |
| Power supply AC Input Frequency Range | 47~63Hz |
| Networking connection mode | RJ45 Ethernet 10/100M |
| Operation temperature | 0~40°C |
| Storage temperature | -20~70°C |
| Operation humidity(non-condensing) | 10~90% RH |
The Antminer L3 + version was released by Bitmain as the complexity of Litecoin mining increased. The manufacturer used 4 standard Antminer L3 boards to complete the new equipment.
In fact, in terms of performance relative to the previous model, L3+ turned out as a "twin miner".
The developers have managed to reduce energy efficiency, which has increased by 60% compared to the first model, with a double increase in hash rate.
Antminer L3 + has the following characteristics:
After first batches of L3+ were released, Bitmain released firmware that enabled hash rate up to 600 MH/s. Over the years of subsequent use of the equipment, developers have created many alternative firmware variants for optimal mining of LTC and other scrypt coins.
You can choose the most optimal variants of these programs on our site. Using the firmware not only increases miner's earnings, but also extends the life of the equipment due to the optimal settings.
